Home Tech Does Netgear Nighthawk Work With CenturyLink?

Does Netgear Nighthawk Work With CenturyLink?

by stacy

Assuming you have an appropriate Netgear Nighthawk model, then – Yes. The Netgear Nighthawk is compatible with CenturyLink, an internet service provider (ISP). This article will demonstrate how.

CenturyLink ISP will gladly rent or sell their certified equipment to you. This might not be the right solution for you, for many reasons. You may have an existing unit with a comparable or better performance, or you simply want to use another. Let’s be honest. There are many better routers and modems, but the Netgear Nighthawk is one of the most well-known.

Before we get into how to make your Nighthawk communicate with CenturyLink, there’s a few things that you should be aware of.

First, you must know which type of CenturyLink internet service you have. Do you want DSL or fiber optic internet?

You will need to answer this question to find out which Netgear Nighthawk model you own or wish to purchase. If you use DSL, you will need a router/DSL modem combo unit, and if it is a fiber-optic connection, you’ll only need a router since there is nothing to modulate and demodulate. The signal is already digital. Netgear likes to complicate matters a little so they named all their routers Netgear Nighthawk. You’ll have to find out a specific model number to know what you have.

Recommendations:

  • CenturyLink DSL Red Light: What does it mean and how to fix it?
  • CenturyLink Modem Blinking Blue: 6 Ways To Fix It
  • Centurylink Modem has no DSL Light: What is the Meaning?

Netgear Nighthawk AC1900D7000 router/DSL combo unit is one example. Netgear Nighthawk AC1900R6900P router is another.

Now that we got this out of the way let’s show you how to make your Nighthawk work with the CenturyLink service.

How to make Netgear Nighthawk function with Cyberlink DSL

We recommend that you rent their equipment for a month if you’re a new user of CyberLink. This will allow you to verify everything is working properly with the signal. Once you’re confident, set up the Nighthawk and then return the CyberLink equipment.

Also, don’t use the Netgear app. You can avoid any frustrations by connecting a computer to the Nighthawk via the Ethernet cable.

Open the internet browser, and type in “Administration Panel” to access it. routerlogin.com. You will be asked to enter the default username/password (username admin, password password)

Login to Netgear Nighthawk to proceed to Advanced > Internet

Select from the following options CenturyLinkInternet Service Provider.

Set transfer mode to VDSL (TPM).Use the DESL mode VDSL2.

Choose ‘Internet’ from the drop-down menu below.

Check the boxes next to ‘Allow This Interface’ and ‘Use VLANID.’

As a value beside VLANID, type in 201 and as priority, type 0.

For “Does your internet connection require a login?”, choose Yes.

Select Encapsulation in the dropdown menu PPPoE.

Enter your Password and usernameCenturyLink.

Connection mode needs to be ‘Always on,’ and Idle timeout needs to be 0.

Internet IP address – Get dynamically from the ISP

DNS – Get automatically from ISP

NAT – Enable

Router MAC address – Use default address

Click Apply

You’re good to go!

How to Make Netgear Nighthawk Use Cyberlink Fiber Optic

If you’re using CenturyLink’s fiber-optic connection, all you’ll need is a router, as we previously stated.

The CenturyLink gateway does not need to be in bridge mode; instead, it should be removed from your network.

CenturyLink uses a smart technique known as 201 virtual network tagging to identify all traffic entering and exiting your network. As a result, you won’t be able to use or designate your own router as a primary and get even half-decent speeds.

Unplug the CenturyLink gateway and replace it with your new router, making sure to enable 201 VLAN tagging in the new router’s settings.

Depending on where you reside, it could be as simple as plug-and-play.

If CenturyLink is still utilising PPPoE in your location, you’ll need to do some configuration work. If they provide you a login and password to access the internet, you’ll know they’re utilising PPPoE.

The procedure for setting up the system is the same as previously explained.

Make sure you have a wired connection while setting up your router. To connect your computer or laptop to the router, utilise an Ethernet cable.

Start the internet browser. Type in routerlogin.com. Enter default username/password (username: admin; password: password).

Log in to Netgear Nighthawk to proceed to Advanced > Internet

Select from the following options CenturyLinkInternet Service Provider.

Type in 201 next to VLAN ID and type 0. for priority.

For “Does your internet connection require a login?”, choose Yes.

Select Encapsulation in the dropdown menu PPPoE.

Enter your Password and usernameCenturyLink.

Connection mode needs to be ‘Always on,’ and Idle timeout needs to be 0.

Internet IP address – Get dynamically from the ISP

DNS – Get automatically from ISP

NAT – Enable

Router MAC address – Use default address

Click Apply

While some settings and options may not be at the same place as others, they will all have the same names or similar names. Try to follow these steps and not miss any settings—especially VLAN ID since you won’t be able to use the internet without VLAN 201 tagging.

Summary

There are many benefits to changing CenturyLink routers for Netgear Nighthawks. These include a stronger, more reliable wireless signal as well as faster Wi-Fi speeds.

CenturyLink will attempt to keep your equipment use confidential. Therefore, they will hide how Netgear Nighthawk can work with their service.

It’s easy to do once you learn the tricks.

You won’t have any issues if you choose the right Netgear Nighthawk model for your internet provider and configure your router to use 201 VLAN tagging.

You will soon enjoy the benefits from a top-quality router if you follow the above instructions.

Related Posts

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More