Are there two routers in one network? Although you don’t see this too often, it is possible and is done in certain situations:
- To enable the use of more wireless devices – the second router is used to upgrade the wired network.
- The second router increases the WiFi range of the home network – it’s used as a WiFi extender.
- To enable networking of wired devices that are too far away from the router.
- To allow video streaming between devices and to ensure that there is a separate subnet within a home.
Placement of another Router
To perform initial configuration, the second router and computer must be within close proximity. You can configure wired or wireless routers using a computer connected to it with an Ethernet network cable. Once you are done, you can move it to another location.
Connecting another router via an Ethernet cable
One end of the Ethernet cable should be plugged into the second router’s uplink port (which can be designated Internet or Wan), and the other end should be plugged into one of the first router’s free LAN ports (which can be plugged into any port except the WAN port).
Connect another wireless router
Wireless routers can be connected via an Ethernet cable just like wired ones. Home routers can also connect via an Ethernet cable, provided that the router is not used as a router, but only as a wireless access point.
The client mode setting must be enabled for the second router to function correctly. This mode is not available on many home routers. You can check the documentation to see if your router supports client mode.
How to set up Wi-Fi channels for wireless home routers
Both routers may be wireless and their WiFi signals could interfere with one another, leading to network interruptions or slower operation. Because both routers use the same WiFi frequency bands, this is possible. These frequencies are called channels. Both routers can use the same channels, which can lead to operational problems.
How to select the best WiFi channels
Configure an IP Address for another Router
It is possible to use a different router without changing the router. IP defaultconfigurations (only if it is to be used as an access point/network switch.
You can use another router to act as an Access Point or Switch
You can use the procedures in this section to allow another router support a subnet within your home network. This is a great way to gain additional control over certain devices. You can configure the second router as either an Ethernet network switch, or access point. This allows devices to connect to other routers and does not create a subnet. It is sufficient to set up a subnet in order to increase Internet access in your house.
How to configure another router without subnet support
As a secondary router, you will need to configure it as follows: Switching networksThe Ethernet cable should be plugged in to one of the available ports on the router.
How to configure an old router as network switch
It is important to set up the repeater mode or bridge mode to enable the new wireless router as an access point.
It is also important to update the IP configuration for wired and mobile routers
First, check the local IP address of the other router. It is necessary to change it in order to ensure that the network address, which falls within the DHCP range, has been successfully configured.
How to connect 2 TP-Link routers. One can be used as an access point.
Translate Network Address (NAT) is a procedure performed by your router and used to ‘’mask’’ your private IP address and modify it into a public IP address before sending the data packets to the destination server.
Network Address Translation
NAT transforms an IP address (or WAN) from public to private by changing its IP address. This allows more devices and computers to access the network. NAT prevents direct access to your local IP addresses. This secures your network.
Common problems when connecting routers are: Double NAT.
NAT is applied to each router as well as the gateway. When you use two routers your network will be divided in two private networks. It is possible for devices to be interconnected to one network to cause interference or have trouble communicating with others. You may experience problems with port forwarding, VPN connections, SSL websites, and other issues. It will likely make it more difficult to play online games.