Home Router Netgear Router Blinking Orange Internet Light: What To Do?

Netgear Router Blinking Orange Internet Light: What To Do?

by stacy

Ever used the internet, and suddenly your Netgear router started blinking orange? Well, there is nothing to worry about – you’re not the only one. We will discuss the meaning of the orange blinking internet LED light and offer some suggestions on how to fix it.

Netgear Router Blinking Orange Internet Light

But first, let’s see what does it mean when this happens.

Netgear Router Blinking Orange Internet Light: Meaning

If the internet light blinks orange, it is usually a sign that there is a problem with the connection. The router is detecting the connection but not transmitting any data. Most of the time, the cause is on your ISP’s end, but it’s also conceivable that the device is to blame, especially if the firmware is outdated.

These solutions should resolve the orange internet problem with your Netgear router. Take your time and try them all. If your router reboots after you apply the fix it is important to allow it to restart completely. You should take care of this. You don’t need to rush.

How do I fix the Netgear Router blinking orange internet light issue?

You can either follow the steps below, or skip to the end and contact Customer Service.

So, let’s start!

Upgrading the Router Firmware

We have mentioned that obsolete firmware could be the cause of the blinking orange light. We recommend that you log in to the Netgear router admin dashboard, and check if there’s a newer version. To upgrade your firmware, you will need to check if it is available. Once the firmware update is completed, the Internet light will stop blinking orange.

check if new firmware is available

If the LED light activity persists, you can try these suggestions.

Restart Your Home Network

Following a particular order, the next solution must be completed. You will need to switch off the modem, router and power source. Next, disconnect the router and modem from the power source. For a few moments, leave them unconnected. Connect the modem to the power supply and then turn it on. Wait for it to boot completely. Then connect it to the power supply and turn it off. Wait for the router to restart and check that it is blinking orange.

Continue to the next solution if it is.

Check the Cables

Connector problems can easily be caused by a loose or damaged cable. Even though it might seem impossible, it does happen. Perhaps you moved your equipment, cleaned up around the router, modem or pet, all of these things can damage or cause the connectors to become loose.

You should inspect cables carefully for visible damage and unnatural bends. Make sure they are securely connected to the correct ports. Replace the cable if you find something. Connect the connector securely and check if the orange light still blinks.

Are you affected?

Your router may not identify the connection or may detect it but be unable to connect due to a service or power outage. It is easy to find out if there is an outage. You can either check your ISP’s dedicated app, visit their website via your smartphone or contact them directly by telephone to see if you are affected.

You can only wait if there is an outage. Most cases will be resolved quickly, and the orange light will go away once the problem is solved.

However, if no outage occurs, it may indicate that another problem is at hand. Try the following in that situation.

Reset the Router to Factory Defaults

NOTE:All custom settings will be lost if the router is reset to factory defaults.
the reset button is at the back
Sometimes, the router settings can get misaligned. In such cases, it is recommended to reset the router to its factory settings. This resets router settings to their default settings. This is a crucial step, so we urge that you read the following guide on Netgear’s website.

Consult the Netgear router handbook for instructions on how to reset your router to factory defaults. If you don’t have the default Netgear router login credentials, don’t do anything. After the factory reset, you’ll need these credentials to reconfigure your router.

Reading:Netgear Router Lights On, But No Internet (Easy Solutions).

Get in touch with support

This step is usually skipped if it doesn’t help. Perhaps your router is broken, and you are unable to repair it on your own. In such instances, you should seek technical assistance. They can inspect your router’s settings, test your connection, and assist you in resolving the issue. Make sure you clarify what’s happening and what the issue is.

If they can’t help you remotely, they can send a specialist to do a thorough inspection and see if he can fix the problem.

Last words

The Netgear router’s blinking orange light can be inconvenient, but it doesn’t necessarily mean your internet connection is over. These procedures will help you rapidly resolve this issue. You can always contact support if you find some of these options to be too complicated for you.

Related Posts

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More