Home Router Shenzhen Bilian Electronic On My Wi-Fi

Shenzhen Bilian Electronic On My Wi-Fi

by stacy

If you’re reading this text, then you’ve probably come across Shenzhen Bilian electronicYou can access your Wi-Fi. There’s no need to be alarmed; it doesn’t signify that your network has been hacked or that a firm is spying on you.

To better understand why Shenzhen Bilian Electronic is on your Wi-Fi, read on. To begin, we must define Shenzhen Bilian Electronic. Following that, we’ll go over how to figure out which device it is and how to unplug it from the network.

What is Shenzhen’s Bilian Electronic?

Shenzhen Bilian Electronic Co. Ltd. develops, produces and sells network communication devices. This company specializes in all things connected to connectivity.

Research and development at the company are focused on smart devices and IoT (Internet of Things), as well as community equipment and smart cities. It handles all steps, including hardware and software that runs on it and networking services.

Shenzhen Bilian Electronic

They specialize in wireless technology, specifically mobile communication using network terminals and modules that enable seamless wireless connectivity. Their products are numerous.

They produce wireless routers and adapters, as well as ethernet switches, wireless module, USB cards, and adapters. So, let’s get to the point where we explain why Shenzhen Bilian Electronic is on your Wi-Fi.

Why is Shenzhen Bilian Electronic so prominent on my Wi Fi?

As we mentioned, this company has a lot of expertise in wireless network communication. As a result, there’s a good chance that a gadget you’re using or a component of your device is made by this company.

Because an unfamiliar device linked to your wireless network is labelled with the manufacturer’s name, you’re seeing it on your Wi-Fi. Multiple devices with the manufacturers’ names and IP addresses can be discovered using simple MAC address scanning.

Shenzhen Bilian Electronic on My Wi-Fi

Other than the fact that you have a Shenzhen Bilian Electronic device or a part of one of your household members’s devices, there are other reasons.

  • Wi-Fi sharing: If you’ve shared your Wi-Fi with neighbours or visitors, they may connect every time they pass by your house. They could be using a device from Shenzhen Bilian Electronic Co. Ltd.
  • Samsung gadgets: There’s no need to be concerned if you own a Samsung smartphone because the wireless module is made by Shenzhen Bilian Electronic. Disconnect the phone to see if it’s still connected to your network.

How do I identify which device is Shenzhen Bilian Electronic

A MAC address scanner is required to identify the device that belongs to Shenzhen Bilian electronic. Advanced IP Scanner. However, the scanner may not show the manufacturer or the IP address.

In this scenario, it’s not much of a help, so you might have to do things the hard way. Only one device should be turned on at a time, and then the scan should be conducted to see if it appears. If the gadget doesn’t have a name, this is the sole way to identify it.

You can also use your router’s web interface to look for it. Simply input the router’s IP address into your browser, followed by your login credentials. On most pages, you’ll need to look for the access control settings.

You’ll be able to see all clients connecting to your Wi-Fi after you’ve arrived. Unfortunately, if the gadget has no name, this method may not produce any results. This isn’t a good way to identify a device that doesn’t have a name.

How do I remove the Shenzhen Bilian Electronic

You have two options to remove Shenzhen Bilian Electronic Co., Ltd. It is easiest to change your Wi Fi password. However, you can also use MAC filtering. MAC filtering can be used to identify the device. Simply block the address and see which device does not have a connection.

Change the Wi Fi Password

To change your Wi Fi password, you will need to Log in to your router. After logging into your router’s online settings page, look for the Wi-Fi tab and select it. You’ll be disconnected when you save the new password if you’re using a wireless connection. It’s critical to keep track of everything.

MAC Filtering

You can remove Shenzhen Bilian Electronic wirelessly from your Wi Fi network by going to the router’s settingsFind the MAC Filtering Section on the page. It’s usually located in the Advanced. The first thing to do is check out the connected devices.

Copy the Shenzhen Bilian Electronic MAC Address from the list. Go toMAC FilteringPaste the address into the box. Add MAC Address Box. Click on AddMAC address to have the device blocked from your Wi Fi.

Conclusion

You can easily remove Shenzhen Bilian Electronic from your Wi-Fi to put your mind at ease. You don’t have to worry, nobody is spying on you, and nobody hacked into your network. We have discussed the products of the company and you now know which type.

Related Posts

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More