Home Tech Wi-Fi Network Could Not Be Joined (7 Ways to Fix It)

Wi-Fi Network Could Not Be Joined (7 Ways to Fix It)

by stacy

Wi-Fi networks are becoming an integral part of our daily lives, both at home and at work. You’ll have a burning need to reconnect if there’s an interruption or if you get a notification like “Wi-Fi network could not be joined.” Moving closer to the router is a quick fix, and if you’re lucky, your device will rejoin the network without difficulty.

There could be a number of reasons why your devices are unable to connect to the internet. Many times, a simple repair is available, such as tightening loose wires or pressing the on/off button. This tutorial will walk you through the different causes and methods for restoring your internet connection.

Disconnect your device and reconnect it

If you’ve moved closer to the router and reconnected any loose cords but the problem persists, you’ll need to manually disconnect your device from the Wi-Fi network. Connect it to the Wi-Fi after a brief pause.

While this may appear obvious or discordant, it eliminates the possibility of system faults. The bugs will go once you’re back on the Wi-Fi connection, and you’ll be able to enjoy your internet connection as usual.

Restart your Router

Other than restarting your device you can also Restart your router. Most problems with connection originate at the router. Your router may have buggy firmware, just like your devices.

Turn off the router and pull out the cables from the ports. After a while, turn the router back on. This will remove any bugs and allow you to rejoin the Wi-Fi network without bugs.

Check DHCP Settings

Dynamic Host Configuration Protocol (DHCP), automatically configures devices on IP network. If the DHCP is not working or if it’s disabled, it won’t assign an IP address to your device. It is a good idea to check the DHCP settings. This will resolve the issue. Wi-Fi connection issue.

Disable MAC Filtering

Filtering MAC addresses Blocks traffic from certain devices. Your router will identify the MAC address of a device and block access to devices that are not listed in your MAC filtering settings. That could be the reason why you can connect to Wi-Fi but don’t have internet access.

You can check this setting on your router. The easiest way to fix it is to disable MAC address filtering completely. If you don’t want to disable the setting completely, you need to check if that specific device appears in the list of blocked addresses and remove it from that list. Your internet access should be restored immediately.

ISP Issues

Your Internet Service Provider (ISP), may also be responsible for your internet connection problems. You should check this first. These issues may have caused your wireless network to not connect due to:

A bill is outstanding

Illegal information is transmitted or stored

Networks affected by natural disasters or bad weather

There’s not much you can do about it but contact your ISP. Only they can resolve this type of problem.

How to determine if your ISP is having problems

Go to your ISP’s website first. They usually keep you informed about any outages in your area. If none are available, you can call their customer support. They can tell you if you’ve kept illegal data or cut your line due to unpaid charges.

Your ISP could also be causing bandwidth throttling. This is where your ISP deliberately slows your internet connection. There are several reasons they do this. One reason is that your area might have been overcrowded by heavy users and the ISP decides not to allow you to use the full bandwidth.

You might also have exceeded your data limit. You can always check the status of your Internet speedYou can run the internet speed test using your smartphone, laptop, or PC.

How to Fix Your ISP Problems

If your ISP cuts off internet service because of unpaid fees you can simply pay the dues and your connection will be restored. You must pay fines before discussing a reconnection with your ISP if you are participating in unlawful online activities.

Natural disasters, regrettably, are beyond your control; you may have to deal with it until your ISP completes all necessary repairs to their infrastructure. If you’re being throttled, the best thing you can do is report the problem and work with your ISP to resolve it.

Get More Support

If you can’t get a device connected to Wi-Fi, try to connect your other devices to the same Wi-Fi. If you get the same results, it could be an outage. Contact your ISP to get help.

Another possibility is that you’re in a dead area. Try connecting at another spot. If you can’t get connected anywhere else, it is likely that your Wi-Fi network has dead spots. You can fix it. Wi-Fi extenders to be installedOr You can change the router to make it more powerful.You can even make it better! System for mesh Wi-Fi.

You may also have an issue with the firmware of your router. If that’s the case, go to the router’s settings or the manufacturer’s website, and download and Install the latest firmware version.


When you try to join your device to a Wi-Fi network and get the notice “Wi-Fi Network Could Not Be Joined,” it’s really annoying. When confronted with this predicament, most people become panicked, especially when attempting to connect a recently purchased device to a Wi-Fi network. It’s likely that the new device won’t work with the existing Wi-Fi network.

Modern devices shouldn’t have compatibility issues unless they were made by part time engineers. These fixes are intended to address multiple possible problems that could be causing Wi-Fi connection problems.

If neither your ISP nor our DIY solutions can resolve your problem, you might consider switching to another ISP.

Related Posts

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More