Home Router Xfinity Router Blinking Orange: Meaning and How to Fix it

Xfinity Router Blinking Orange: Meaning and How to Fix it

by stacy

The status of the router and its network is indicated by the lights. We see the lights blinking or solidly, but it’s useful to know what color and behavior they are (blinking or solid).

Xfinity Router

The Xfinity router blinking orange is one example. If we take a quick look at the help section at the Xfinity’s website, we will see that the orange light flashing on the xFi Gateway (3rd Generation) and the xFi Advanced Gateway is stated as “all other color combinations”. The Xfinity website states that an orange light on your router’s Xfinity system indicates that it is connecting to the Xfinity systems.

Why does the Xfinity router flash orange?

The firmware upgrade is one reason why the Xfinity router’s blinking orange light will flash. If this is the case don’t power off the router. Wait for the firmware upgrade to complete.

A malfunctioning or damaged splitter could also be the reason for an orange blinking light.

Bad weather or scheduled maintenance can cause service outages.

It could also be a defective modem or router.

There are many reasons why the Xfinity router may blink orange. Here are the steps to fix it. In case the fixes given in this article don’t fix the problem, you will have to contact support. However, let’s see what you can do to fix this problem.

Let’s start!

How can I fix the Xfinity router blinking red problem?

The manual states that an orange light could indicate that the router has connected to Xfinity. You will need to wait approximately 15 minutes before the router lights return to normal. If the blinking does not stop after that time, you can try the following steps to fix the problem.

Reboot the router

Always rebooting or power-cycling your router is the best solution. This simple fix is guaranteed to fix most problems. However, if it doesn’t fix the problem, you can skip to the next solution. But first, let’s see how to reboot the router.

You can either reboot the Xfinity router via the Xfinity App, or manually.

Since the network connection is probably off when the orange light blinks on your router the Xfinity App won’t help much. It is possible to do this manually. After 10-15 seconds, unplug your router from the power supply and plug it again. Yes, it’s that simple.

If your Xfinity router still blinks orange, you can try the next solution.

The splitter is worth a look

This problem could also be caused by a damaged or malfunctioning splitter. This can be checked by connecting the router’s internet cable directly. Verify that the orange blinking light is still visible.

Make sure you check the cables

This generally doesn’t happen often but when we are replacing our equipment, cleaning around it, moving the router to a better place to improve the wireless signal, we may unintentionally disconnect a cable, make the connection loose or simply connect the cable to a wrong port. This can cause an Xfinity router to blink orange.

You will need to inspect all cables to make sure they fit into the correct ports. Make sure to check the ends of each cable. Make sure the cable is correctly connected.

Service outage

Signal strength issues can cause signal loss, which can cause the orange light on the screen to blink. To check for service outages, use your smartphone or the Xfinity App. After the service outage has ended, the orange light will be restored. You can only wait for the service provider to restore your internet connection or get additional information.

Malfunctioning router

If you have been using the same router for many years it is probably telling you that it’s time for a new one. However, if the router was rented recently, it is a better idea to contact Xfinity tech support to resolve the issue.

Contact the Xfinity tech support

Xfinity tech support

In case you haven’t managed to fix the Xfinity router’s blinking orange problem, the last step is to contact the Xfinity support. The support team can either remotely fix the problem or send a technician to your home.

Final thoughts

The Xfinity router blinking in orange is an unusual behavior that should be addressed immediately. Before calling Xfinity support, you should try the following solutions.

You can also contact support if the orange light problem seems too complicated to resolve on your own. That is perfectly acceptable. It is important to have a functional and functioning home network within the shortest time possible.

Related Posts

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More